How do the images look with the bayer? I recently submitted a fix to recognize this camera as "color" so that the bayer filter property is exposed. However, the final image looks "interlaced" and the bayer pattern does not match one captured on a PC by Maxim DL.
I've had a hard time finding any good information of how the bayer matrix should be with these cameras. Some forums like on cloudy nights implied that each chip could possibly have a different one (I kind of find it hard to believe).
I did have good luck with color. I made a pinhole lens with foil and a color chart with construction paper. So if for example I force RGGB and up-bottom orientation in Siril(I believe this setting used to be called kstars-ekos/pixinsight compatibility) and some white balancing, I get the attached image.
I've also taken a test image of M33 and the colors seemed pretty good this way. I've had some set backs with my setup so that is as far as I got. I hope to get back on track after all these holidays.
I'm not an expert on maxim but maybe it has something to do with the up-bottom orientation?
P.S. Edit: I believe the person who sold it, did so because they had too much trouble getting the color right. I know this is just hearsay, and I don't know what software this person was using, but it might be possible Maxim didn't have it right either.
I took some images tonight and viewed them through the fits viewer. I took a picture of that same color chart with the pin hole setup. The colors for sure are off. I notice right off the bat red shows as green. I'll be able to look specifically what is going on with the bayer matrix Thursday evening and will reply with my findings.
No this is my fault. I made changes to the driver to make bayer work for SXVF-M25C. So it looks like that SXVR-M25C has a different bayer pattern after all. I just pushed a fix, can you please git pull and test again?
Ok using 7cc5083cc152aeaa4edc9b6fd824771945a95f60 checkout in indi-3rdparty. Red is blue and the other colors look pretty gray in the KStars FITS Viewer.