Has anyone ever had this problem???? This is a completely new problem for me. I've been using Ekos for about a year now and now after about the first two focus runs, the fits are not showing up on the screen and the focus module is reading the same old image over and over, thus the HFR never changes and the focus routine finishes without actually reading any new images. It could be related with another new problem that's been happening with the summary screen preview fits sometimes do not come in to the preview screen. The Indi messages say that the image was downloaded but the images are never shown on the screen. I'm using a ASI183MM-PRO, Moonlite focuser, Powered USB Hub, raspberry pi4 with the latest Stellarmate OS.
Perhaps I'll try a different USB cable for the ASI183? What Logs do I need to turn on if I need go that route?
We have a pretty similar setup (I use the ASI183mc Pro with a RPi4). I doubt your cable is the issue. I'd start debugging elsewhere. Have you tried just capturing a preview or loop mode (buttons to right of stop) separate from running the autofocus routine)? Your description is so odd, that I would suspect program confusion of some kind. Did you try a program exit & restart? What about a Pi4 reboot? I never have had the problem you describe, so I guess it could be hardware, but I'd be surprised.... Please let us know what you find so that we'll all know what it was! Cheers, Doug
Preview and loop buttons work just fine. You brought something to my attention. The only time this problem happened is when it was doing a scheduled auto-focus on it's own! I guess I can turn on EKOS focus module logs and CCD logs?
I just did a simulation scheduled auto-focus routine and it happened! Now, we're on the right path. I turned on file verbose logging for Focus Module and CCD but no log files were saved. What am I missing here?