I swapped scopes today and with it the ASI EFW changed too from the 8 position to the 5 position. (both ASI or ZWO I should say EFW)
oddly the driver is the same?
Since I made the change thing aren't working properly for the wheel. It says changing and never finishes etc. something else I need to change?

It was connected and working weird... now it won't connect.

I think I found the problem. I needed some DELAY - else it was probably timing out. Seems fine with a 4 second delay.

Was working then stopped. I'll check cable and make sure there isn't any friction in the wheel. (filters seemed quite thick). It would try to pick a filter and would hang.