Hi
I am unable to get indi/Ekos to connect to my QHY8.
I created a profile in Ekos to start the QHY8
If I start Indi, it does not connect.
If I then stop indi, Kstars /Ekos crashes with the following error.

Executable: kstars PID: 9597 Signal: Segmentation fault (11) Time: 21/08/2016 17:22:8
I can connect OK to my QHY9 and to my QHY 5l11 mono.

Only the QHY8 is an issue.

BTW the lost username / password function of the forum is not working. It reports an incorrect captcha entered even whn it is correct. I had to create a new login to post this message.

cheers
Gary

Run KStars via GDB and report backtrace

Hope this right! - very new to Linux
cheers
Gary

(gdb) bt
#0 0x00007fffedd48a2d in write () at ../sysdeps/unix/syscall-template.S:84
#1 0x00007fffedccab2f in _IO_new_file_write (f=0x7fffee016540 <_IO_2_1_stderr_>,
data=0x7fffffffae80, n=18) at fileops.c:1263
#2 0x00007fffedccb2ba in new_do_write (to_do=18,
data=0x7fffffffae80 "indi_qhy_ccd: EOF\n", fp=0x7fffee016540 <_IO_2_1_stderr_>)
at fileops.c:518
#3 _IO_new_file_xsputn (f=0x7fffee016540 <_IO_2_1_stderr_>, data=<optimised out>,
n=18) at fileops.c:1342
#4 0x00007fffedca1f54 in buffered_vfprintf (s=0x7fffee016540 <_IO_2_1_stderr_>,
format=<optimised out>, args=<optimised out>) at vfprintf.c:2341
#5 0x00007fffedc9f2ed in _IO_vfprintf_internal (
s=s@entry=0x7fffee016540 <_IO_2_1_stderr_>,
format=format@entry=0x7ffff7b558bd "%s: EOF\n", ap=ap@entry=0x7fffffffd438)
at vfprintf.c:1293
#6 0x00007fffedd68309 in ___fprintf_chk (fp=0x7fffee016540 <_IO_2_1_stderr_>,
flag=flag@entry=1, format=format@entry=0x7ffff7b558bd "%s: EOF\n")
at fprintf_chk.c:35
#7 0x00007ffff7b0ebfb in fprintf (__fmt=0x7ffff7b558bd "%s: EOF\n",
__stream=<optimised out>) at /usr/include/x86_64-linux-gnu/bits/stdio2.h:97
#8 clientMsgCB (fd=<optimised out>, arg=<optimised out>)
at /build/libindi-q8rfIL/libindi-1.2.0+r2603~201608201807~ubuntu16.04.1/libindi/indidriver.c:847
#9 0x00007ffff7b11df5 in callCallback (rfdp=0x7fffffffdd90)
at /build/libindi-q8rfIL/libindi-1.2.0+r2603~201608201807~ubuntu16.04.1/libindi/eventloop.c:346
#10 oneLoop ()
at /build/libindi-q8rfIL/libindi-1.2.0+r2603~201608201807~ubuntu16.04.1/libindi/eventloop.c:432
#11 0x00007ffff7b11fcd in eventLoop ()
at /build/libindi-q8rfIL/libindi-1.2.0+r2603~201608201807~ubuntu16.04.1/libindi/eventloop.c:105
#12 0x00007ffff7b07fe5 in main (ac=0, av=0x7fffffffdf58)
at /build/libindi-q8rfIL/libindi-1.2.0+r2603~201608201807~ubuntu16.04.1/libindi/indidrivermain.c:97
---Type <return> to continue, or q <return> to quit---
#13 0x00007fffedc72830 in __libc_start_main (main=0x4040d0 <main@plt>, argc=1,
argv=0x7fffffffdf58, init=<optimised out>, fini=<optimised out>,
rtld_fini=<optimised out>, stack_end=0x7fffffffdf48) at ../csu/libc-start.c:291
#14 0x0000000000404739 in _start ()

Thanks, but it's still not enough. Do you have TeamViewer? If you do, message me the details and I'll check it out.

Hi!

What version of Linux and kernel are you running? I cannot connect my QHY5 in latest kubuntu and latest kstars-bleeding/indilib. What does dmesg say when you connect the QHY8?

Magnus

Hi Magnus,
using latest Kubuntu.
Mine is a QHY5L 11 - works perfectly with Indi/Ekos

The QHY8 isn't seen by Indi/Ekos at all.
Jason had a look via Teamviewer and found it had a firmware version he had not seen before - I have to follow up with QHY directly. It is a very early model - has always worked fine under Windows, but not with Linux apparently .....