Very interesting. I'm currently using a USB-A type supply (only 2.4 A), simply because I was worried that if I bought a USB-C supply it might not like the Pi and supply no power or limit to low current mode.
I have had a couple of times where the Pi has stopped responding then found the red power led is off which seems to suggest low power supply.
jrsphoto wrote: I'm doing things a little different than most. I'm using POE. A
Gigabit Ethernet POE injector
and a
POE to USB-C splitter
. With 100' of Shielded, waterproof Ethernet cable, I've had no problems so far.
Max S.
RPI 4 B (4Gb) with SMate
Nikon D5500 H-a modified. Nikon D5500 stock
AT72EDII, TPO RC6
ZWO ASI294MC Pro, ASI071MC Pro
ZWO ASI120MC-S on ZWO 30F4
ZWO ASI224MC-S on Orion 50 mm f/3.2
ZWO EAF x 2
SW AZ-GTi x 2
SW HEQ5
Well my "in the field" is a little different. MY wife and I live/travel in a 40' motorhome. I run the ethernet cable out a window and control the mount from inside the RV.