My mount has been successfully connecting to indi for some time. This is a new G11. The client is now crashing everytime I try to connect to the mount. I have attached log file. Any help please?? Thanks... Bruce
I may be wrong, because I am relying on my memory, but is 9600 baud the correct rate?
Losmandy G11 with Gemini 2 controller
QSI 583/683 monochrome camera with filter wheel
Starlight Xpress Lodestar X2 guide camera
Microtouch Focuser controlled using Arduino UNO emulating Feathertouch controller
Raspberry Pi 2GB with Raspberry Pi OS 32bit
"The traditional serial port on your PC (or a USB to RS-232 serial converter) can connect
to Gemini’s serial port #1 to send and receive commands and data using the Gemini
serial protocol. The default port settings for serial port #1 are 9600 baud, no parity, 8
bit words, 1 stop bit (9600,N,8,1). "
I have found the problem. I use Pegasus ultimate power hub. It seems the hub has developed a problem with indi driver and Kstars dated after November of last year. Loaded a older version and problem went away.... Bruce