Greetings
I am trying to run Kstars/Ekos from a laptop, specs in subject line.

When connecting to Ekos from Kstars, there is a conflict message indicating the mount, ( AVX and EQ6 on Eqmod both get the same error) and Myfocuserpro2 are both attempting to connect on /dev/tty/USB0

In the Indi Control Panel, under the mount/focuser tab, Connection, System Ports is a box, Prolific_Technology_USB with no further option next to it. This is acceptable to the mounts, but the focuser throws handshake errors

When using my Raspberry Pi under Astroberry, there is an additional option Connection, System Ports, Prolific_Technology_USB, 1a86_USB2.0
When I click this option, the next line down, Ports, Port, Port, is populated by:
/dev/serial/by-id/usb/_1a86_USB_Serial-if00-port0

instead of what is populated by the Linux machine which is:
/dev/serial/by-id/usb_Prolific_technology_Inc._USB-Serial_Controller_D-if00-port0

This is my first Linux machine so please forgive my ignorance.
I didn't see anything that covered this when i searched the forums

I appreciate any thoughts or suggestions.
Thanks,
Dave

Read More...