×

INDI Library v1.8.0 is Released (27 Jul 2019)

INDI Library v1.8.0 is mostly a maintenance release to fix a few bugs in several drivers.

Astroberry Server

  • Posts: 632
  • Karma: 6
  • Thank you received: 244

Replied by Kaczorek on topic Astroberry Server

If you mean Astroberry, the answer is yes. It's licensed under GPL 3.0 so you're free to do any translation.
If you mean KStars and Ekos, you should address this question to Jasem aka knro. However Kstars and Ekos are also licensed under GPL 3.0 so the answer would be also yes ;-)

Bonne chance!
--
Radek Kaczorek
Astroberry Server | NEQ6 | Atik 460EX | Atik EFW2 | ASI 120MM
2 years 3 months ago #16560
The topic has been locked.
  • Posts: 353
  • Karma: 2
  • Thank you received: 25

Replied by maudy on topic Astroberry Server

indi webserver installed fine. There was one issue with a PIFace xml file exception in the parse file.py on group in line 5, which I did not need and so removed the xml file. Removing the file allowed for servermanager.py to come up fine.

Hopefully some day the ASI224 can run as user, until then this seems to work. It is not great but seems to work so far.

the noVNC and VNC setup is nice and smoother, better than anything I was able to to.

Thank you again.
2 years 3 months ago #16561
The topic has been locked.
  • Posts: 10
  • Thank you received: 1

Replied by argonothe on topic Astroberry Server

Thanks, will keep you updated!

For Ekos, Jasem is already aware ;)
2 years 3 months ago #16562
The topic has been locked.
  • Posts: 349
  • Karma: 1
  • Thank you received: 43

Replied by patdut on topic Astroberry Server

Hello Kackzorec,

I just installed astroberry on my Rpi3.
I met the first problem immediately with the zwo cams (ZWO 120MM-S and 178MM)
The exposures loops 3 times and fail. That looks like the situation we had few days ago with a package version or older version than the one that can be git today.
I tested the last release on my PC and the cameras worked fine.
Maybe Jasem can enlight us on what is wrong because he does something that fixed the problem on x86 computers.

Thanks
Patrick
Last edit: 2 years 3 months ago by patdut.
2 years 3 months ago #16563
The topic has been locked.
  • Posts: 10
  • Thank you received: 1

Replied by argonothe on topic Astroberry Server

Here is the documentation before French translation ;-)
2 years 3 months ago #16565
The topic has been locked.
  • Posts: 632
  • Karma: 6
  • Thank you received: 244

Replied by Kaczorek on topic Astroberry Server

Patrick
Astroberry is using packages from official INDI repository so feel free to apt-get update && apt-get upgrade INDI drivers whenever new version are available.
I personally use ASI120MM and can't see any problem after flashing the camera with compatible firmware.
--
Radek Kaczorek
Astroberry Server | NEQ6 | Atik 460EX | Atik EFW2 | ASI 120MM
2 years 3 months ago #16566
The topic has been locked.
  • Posts: 353
  • Karma: 2
  • Thank you received: 25

Replied by maudy on topic Astroberry Server

Hi,

noVNC works perfectly using FireFox on mac. Logging in on iOS/iPAD or Safari on mac do not work. noVNC does work on these browsers though.

On both iPAD and Mac the initial page comes up fine, after selecting continue with the certificate prompt. However, to log in with the astroberry password continually fails.

Thoughts please?
2 years 3 months ago #16571
The topic has been locked.
  • Posts: 632
  • Karma: 6
  • Thank you received: 244

Replied by Kaczorek on topic Astroberry Server

I'm not using iOS or OSX so I would appreciate help in tracing down the issue - x11vnc logs are located in /var/log directory
In any case you can use VNC client on any device - just point it to astroberry.local:5900
--
Radek Kaczorek
Astroberry Server | NEQ6 | Atik 460EX | Atik EFW2 | ASI 120MM
Last edit: 2 years 3 months ago by Kaczorek.
2 years 3 months ago #16573
The topic has been locked.
  • Posts: 353
  • Karma: 2
  • Thank you received: 25

Replied by maudy on topic Astroberry Server

Yes, I will help. I can look to logs tonight, help debug tomorrow, and will report back.

Need to go for a run now though :)
The following user(s) said Thank You: Kaczorek
2 years 3 months ago #16574
The topic has been locked.
  • Posts: 353
  • Karma: 2
  • Thank you received: 25

Replied by maudy on topic Astroberry Server

After a search and test, it is the SSL certificate that seems to be causing the problem.

Changing the line in this file: /etc/systemd/system/novnc.service

ExecStart=/opt/noVNC/utils/launch.sh --listen 443 --ssl-only --vnc localhost:5900 > /dev/null 2>&1

to

ExecStart=/opt/noVNC/utils/launch.sh --listen 5050 --vnc localhost:5900 > /dev/null 2>&1

astroberry.local:5050/ definitely allows things to work. Unfortunately the SSL is lost.

This page suggests a correction: github.com/novnc/websockify/wiki/Encrypted-Connections

Extracting the CERTIFICATE from /opt/noVNC/self.pem and putting it into a self.cer file does create a certificate that can be imported into iOS, by emailing to myself.

The common name is astroberry.local is different than the hostname astroberry. Putting the CER file on iOS still did not allow for the SSL log in. Perhaps it is the .local?

Perhaps a web page on astroberry that can allow for the download of the public certificate so it can be install on iOS can work. Just a thought.

I can test again tomorrow.
2 years 3 months ago #16575
The topic has been locked.
  • Posts: 632
  • Karma: 6
  • Thank you received: 244

Replied by Kaczorek on topic Astroberry Server

Thanks for your input. Self-signed certificate was my candidate for trouble maker.
I will slightly redesign SSL approach for noVNC so we can use it on various devices.
--
Radek Kaczorek
Astroberry Server | NEQ6 | Atik 460EX | Atik EFW2 | ASI 120MM
2 years 3 months ago #16579
The topic has been locked.
  • Posts: 349
  • Karma: 1
  • Thank you received: 43

Replied by patdut on topic Astroberry Server

Hello Kaczorek,

Would it be possible to add those possibilities to astroberry:

1 improve wlan-conf gui to display the availables SSID and devices to use a better wifi device or to use an ethernet wired link (as network-manager do).
2 a little gui to choose the frame-buffer size in height and width (reducing it improve a lot display performances) with reboot choice.
3 integrate the indi webmanager to be able to use astroberry as a simple access point
4 include skychart and ccdciel in the available tools.
5 a swap space of 2Gb that could be useful
6 make a compressed iso image that can be expanded when starting mate for the first time. I must admit that I don't know how it can be done. But maybe you know :)

I appreciate the https access it is very useful. I have worked on point 4 and 5. It looks easy to do.

Thank you for this great job.
2 years 3 months ago #16582
The topic has been locked.
Moderators: Kaczorek
Time to create page: 0.852 seconds