Since upgrading to latest drivers (Indilib V1.9.0), I can no longer connect to the Pegasus PPBA and the Pegasus Focuser. These connected fine in the previous iteration. Error message is similar on both:
2021-04-26T02:14:34: [ERROR] Failed to connect to port (). Error: Port failure Error: No such file or directory. Check if device is connected to this port.
Port selected for Pegasus PPBA : /dev/serial/by-id/usb-Pegasus_Astro_PPBADV_revA_PPBA5A606G-if00-port0
Port selected for Pegasus DFMC :/dev/serial/by-id/usb-Pegasus_Astro_FocusCube_2_PA5EJ9N6-if00-port0
UPDATE: If I remove the focuser from the configuration, the Powerbox Advanced will connect. As was mentioned in the link
ouioui01provided, the port name is truncated and that truncated name is saved, so it looks like it has to rescan to get the correct port name.
If I add the Pegasus focuser back in, then both the Powerbox Advanced and Focus Cube II will not connect.
For those who do not know, FocusCube2 has its own driver from now on driverName: indi_pegasus_focuscube. Please do not use the DMFC driver with focuscube2 it will not work. Also, in the next days I will check the case of PPBA and if its driver conflicts with DMFC or FocusCube. But as I initially said FocusCube uses new driver.