Bi-monthly release with minor bug fixes and improvements
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
[2020-03-20T15:30:11.380 - : "[SCOPE] CMD <#:Sz 180*00:00#> successful. "
[2020-03-20T15:30:11.413 - : "[SCOPE] CMD <#:Sa +27*26:06#> successful. "
[2020-03-20T15:30:40.561 - : "[DEBUG] Parking... currentAz: 89.9442 dx: 0.399722 currentAlt: 0.107778 dy: 0.189444 "
[2020-03-20T15:30:40.569 - : "[WARNING] Parking... slew status indicates mount stopped by dx/dy too
# ok, pointing to SCP at HA=+/6
[2020-03-20T15:23:06.075 - : "[INFO] calcParkPosition: parkPos=3 parkAlt=27.435000 parkAz=180.000000 "
# ok, axis1 is az, axis2 alt, looks good
[2020-03-20T15:23:06.076 - : "[DEBUG] Setting Park Axis1 to 180.00 "
[2020-03-20T15:23:06.076 - : "[DEBUG] Setting Park Axis2 to 27.43 "
# I guess here is the culprit:
if (calcParkPosition(parkPos, &parkAz, &parkAlt))
{
SetAxis1Park(parkAlt); // should be az
SetAxis2Park(parkAz); // should be alt
LOGF_DEBUG("Set predefined park position %d to az=%f alt=%f", parkPos, parkAz, parkAlt);
}
# This is a real error, not a log format error:
[2020-03-20T15:23:06.077 - : "[DEBUG] Set predefined park position 3 to az=27.435000 alt=180.000000 "
# do not know yet, what that means: sending coordinates to the controller?
[2020-03-20T15:23:06.083 - : "[INFO] Device configuration applied. "
[2020-03-20T15:23:06.083 - : "[DEBUG] Configuration successfully loaded. "
# but the mount reports ra=0., dec= plus 90 (!), I assume that the controller
# could not handle az, alt values
[2020-03-20T15:23:06.084 - : "[SCOPE] CMD <:GR#> "
[2020-03-20T15:23:06.084 - : "[SCOPE] RES <00:00:00> "
[2020-03-20T15:23:06.084 - : "[SCOPE] VAL [0] "
[2020-03-20T15:23:06.084 - : "[SCOPE] CMD <:GD#> "
[2020-03-20T15:23:06.085 - : "[SCOPE] RES <+90*00:00> "
[2020-03-20T15:23:06.085 - : "[SCOPE] VAL [90] "
[2020-03-20T15:23:06.086 - : "[DEBUG] CMD: <:pS#> "
[2020-03-20T15:23:06.086 - : "[DEBUG] RES: <West> "
# again why these values
[2020-03-20T15:23:06.153 - : "[SCOPE] CMD <:GR#> "
[2020-03-20T15:23:06.154 - : "[SCOPE] RES <00:00:00> "
[2020-03-20T15:23:06.154 - : "[SCOPE] VAL [0] "
[2020-03-20T15:23:06.154 - : "[SCOPE] CMD <:GD#> "
[2020-03-20T15:23:06.154 - : "[SCOPE] RES <+90*00:00> "
[2020-03-20T15:23:06.155 - : "[SCOPE] VAL [90] "
[2020-03-20T15:23:06.155 - : "[DEBUG] IsMountInitialized: RA: 0.000000 - DEC: 90.000000 "
[2020-03-20T15:23:06.155 - : "[DEBUG] IsMountInitialized: raZE: 1 - deZE: 0 - de90: 1 "
# ok ,not yet initialized
[2020-03-20T15:23:06.160 - : "[WARNING] Mount is not yet initialized. "
[2020-03-20T15:23:06.160 - : "[DEBUG] EXPERIMENTAL: LX200AstroPhysicsExperimental::IsMountParked() "
[2020-03-20T15:23:06.161 - : "[DEBUG] EXPERIMENTAL: check status... "
[2020-03-20T15:23:06.161 - : "[DEBUG] check_lx200ap_status: received bytes 6, [P00000210P000] "
[2020-03-20T15:23:06.161 - : "[DEBUG] parkStatus: P "
[2020-03-20T15:23:06.161 - : "[DEBUG] Mount is not yet initialized. Initializing it... "
[2020-03-20T15:23:06.162 - : "[DEBUG] APUnParkMount: Sending unpark command. "
[2020-03-20T15:23:06.162 - : "[SCOPE] CMD <#:PO> "
[2020-03-20T15:23:06.162 - : "[SCOPE] <abortSlew> "
[2020-03-20T15:23:06.162 - : "[DEBUG] Mount is initialized. "
[2020-03-20T15:23:06.163 - : "[DEBUG] Unpark() -> unpark position = 0 "
[2020-03-20T15:23:06.168 - : "[INFO] Unparking from last parked position... "
[2020-03-20T15:23:06.172 - : "[INFO] Mount is unparked. "
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.