then

Thanks.

First part fine.

Second part got an error.

I though you already install this

sudo apt-get -y install libnova-dev libcfitsio-dev libusb-1.0-0-dev zlib1g-dev libgsl-dev build-essential cmake git libjpeg-dev libcurl4-gnutls-dev libtiff-dev libfftw3-dev libftdi-dev libgps-dev libraw-dev libdc1394-22-dev libgphoto2-dev libboost-dev libboost-regex-dev librtlsdr-dev liblimesuite-dev libftdi1-dev libavcodec-dev libavdevice-dev

if it does not work, give a screenshot of the output after running the above command.

once done, go to


cd ../../indi-sv305/

rm build -r

mkdir build

cd build

cmake ../ -DCMAKE_INSTALL_PREFIX=/usr

make

sudo make install

sudo ldconfig

Yes I already installed that long line but I started new this morning with a fresh SD with Stellarmate.

Here's my error for the second part.

if you started a fresh, you need to run the apt again.

because if you read the log, it is saying "libcfitsio" and that is installed by that long line


sudo apt-get -y install libnova-dev libcfitsio-dev libusb-1.0-0-dev zlib1g-dev libgsl-dev build-essential cmake git libjpeg-dev libcurl4-gnutls-dev libtiff-dev libfftw3-dev libftdi-dev libgps-dev libraw-dev libdc1394-22-dev libgphoto2-dev libboost-dev libboost-regex-dev librtlsdr-dev liblimesuite-dev libftdi1-dev libavcodec-dev libavdevice-dev

sorry my mistake, you did install it after i told you. Apologies


it seems you have not installed indiserver devel.

what is stellamate? does it come with indi-dev stuff? Why are you not using astroberry?

try running
sudo apt install indi-full

you should still run the long line just to double check you got everything.

Stellarmate is a product running KStars. It is available as a full hardware/software product or just the OS, which I purchased.

I also have AstroBerry on a separate SD card.

Why am I using Stellarmate? No reason. I thought I'd try the "INDI" thing on it first.
I can always do the same thing for Astroberry.

OK, I just did an sudo apt install indi-full and got a couple of errors.

So I did "sudo apt-get update" and then ran "sudo apt install indi-full" and it worked -no errors.

Long line re-ran and no errors.

I'll try the second part again......

Same error on cmake

---

stellarmate@stellarmate:~/thx8411_sv305/indi-sv305 $ cd build
stellarmate@stellarmate:~/thx8411_sv305/indi-sv305/build $ cmake ../ -DCMAKE_INSTALL_PREFIX=/usr
-- Found CFITSIO: /usr/lib/arm-linux-gnueabihf/libcfitsio.so
CMake Error at /home/stellarmate/thx8411_sv305/cmake_modules/FindINDI.cmake:285 (message):
Could not find INDI include directory
Call Stack (most recent call first):
CMakeLists.txt:13 (find_package)


-- Configuring incomplete, errors occurred!
See also "/home/stellarmate/thx8411_sv305/indi-sv305/build/CMakeFiles/CMakeOutput.log".
stellarmate@stellarmate:~/thx8411_sv305/indi-sv305/build $


Web Manager seems to be starting the Driver OK (see attachment).

Then why is Ekos giving me an error? (see attachment)

without knowing which version of indi-sv305 is installed in your system, it will not be easy to say. What we can do is do a reinstall of sv305 and take it from there.

can you check what you see when you run this command

ls /usr/include/libindi/*

also do this:

cd <>/indi-sv305/build/
rm * -f
cmake ../ -DINDI_INCLUDE_DIR=/usr/include/libindi -DCMAKE_INSTALL_PREFIX=/usr

I have whatever version is on GitHub right now.

stellarmate@stellarmate:/usr/include $ ls /usr/include/libindi/*
ls: cannot access '/usr/include/libindi/*': No such file or directory

stellarmate@stellarmate:/usr/include $ cd <>/indi-sv305/build/
bash: /indi-sv305/build/: No such file or directory

I have a build folder in /home/stellarmate/thx8411_sv305/indi-sv305

It contains a CMakeFiles folder and a CMakeCache.txt file both created this morning.

Are these the items you want me to delete?

The driver has been accepted to INDI 3rd party repository and the primary Ubuntu PPA + StellarMate are now updated and contain the driver. No need to compile directly unless you really need to.

Just got back from a conference.
Should I keep trying to build a driver or can I download the finished one from somewhere.
Thanks.

I found an issue just now in the PPA build, so it should be available in the PPA in the next couple of hours hopefully.