I think someone's hard coded an option.

Connecting an ATIK 383L+ it shows up and is recognised but Ekos then complains:
I'm not sure if something is hard coded and has made it into bleeding.

I use an Atik 383L+ and one thing I noticed is that the camera must have power before you start the indi server. Otherwise the driver never starts up and clients cannot connect.
Basically this means you cant have an indi driven power switcher (relays) in the same indi server because switching on the power after indi-server starts is too late.
I have startup scripts that power on all devices before I start the indi server.
Derek

The camera is recognised in INDI however Ekos seems to indicate it's looking for an Apogee.

You selected Apogee CCD in your profile.

You're right - looking at the profile. Not the main CCD - that was ATIK but the guider was setup as Apogee.

Bleeding is definitely more useable btw.