Bi-monthly release with minor bug fixes and improvements
2020-10-22T09:40:09 Solver Failed
2020-10-22T09:40:09 internal pixel buffer full
2020-10-22T09:40:00 Starting Internal StellarSolver Sextractor. . .
2020-10-22T09:40:00 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2020-10-22T09:40:00 There should be enough RAM to load the indexes in parallel.
2020-10-22T09:40:00 Evaluating Installed RAM for inParallel Option. Total Size of Index files: 19.7149 GB, Installed RAM: 31.2902 GB
2020-10-22T09:39:35 Solver Failed
2020-10-22T09:39:35 Solver was aborted, timed out, or failed, so no solution was found
2020-10-22T09:39:35 Starting Internal StellarSolver Astrometry.net based Engine. . .
2020-10-22T09:39:35 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2020-10-22T09:39:35 Image width 640 pixels; arcsec per pixel range 0.93949 1.76154
2020-10-22T09:39:35 Scale range: 10.0212 to 18.7898 arcmin wide
2020-10-22T09:39:35 Set odds ratio to solve to 1e+9 (log = 20.7233)
2020-10-22T09:39:34 Configuring StellarSolver
2020-10-22T09:39:34 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2020-10-22T09:39:34 Starting Internal StellarSolver Sextractor. . .
2020-10-22T09:39:34 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2020-10-22T09:39:34 There should be enough RAM to load the indexes in parallel.
2020-10-22T09:39:34 Evaluating Installed RAM for inParallel Option. Total Size of Index files: 19.7149 GB, Installed RAM: 31.2902 GB
2020-10-22T09:39:34 Image received.
2020-10-22T09:39:29 Capturing image...
2020-10-22T09:39:23 Slewing to target coordinates: RA (00h 59m 30s) DEC ( 61° 05' 18").
2020-10-22T09:39:23 Solution coordinates: RA (00h 59m 30s) DEC ( 61° 05' 18") Telescope Coordinates: RA (12h 45m 39s) DEC ( 90° 00' 00")
2020-10-22T09:39:23 WCS information updated. Images captured from this point forward shall have valid WCS.
2020-10-22T09:39:23 Solver RA (14.55265) DEC (60.97575) Orientation (0.22974) Pixel Scale (0.73429)
2020-10-22T09:39:23 Field parity: pos
2020-10-22T09:39:23 Field rotation angle: up is 0.229738 degrees E of N
2020-10-22T09:39:23 Pixel Scale: 0.734292"
2020-10-22T09:39:23 Field size: 55.0635 x 44.0628 arcminutes
2020-10-22T09:39:23 Field is: (-196.752, 50.8996) deg from search coords.
2020-10-22T09:39:23 Field center: (RA H:M:S, Dec D:M:S) = (00:58:12.637, +60:58:32.700).
2020-10-22T09:39:23 Field center: (RA,Dec) = (14.5527, 60.9758) deg.
2020-10-22T09:39:23 Solved with index: 4109
2020-10-22T09:39:23 Number of Matches: 11
2020-10-22T09:39:23 Solve Log Odds: 72.9335
2020-10-22T09:39:23 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2020-10-22T09:39:22 Starting Internal StellarSolver Astrometry.net based Engine. . .
2020-10-22T09:39:22 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2020-10-22T09:39:22 Scale range: 0.582152 to 0.873228 arcsec/pixel
2020-10-22T09:39:22 Set odds ratio to solve to 1e+9 (log = 20.7233)
2020-10-22T09:39:22 Configuring StellarSolver
2020-10-22T09:39:22 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2020-10-22T09:39:22 Stars Found after Filtering: 50
2020-10-22T09:39:22 Keeping just the 50 brightest stars
2020-10-22T09:39:22 Removing the stars with a/b ratios greater than 1.5
2020-10-22T09:39:22 Stars Found before Filtering: 20397
2020-10-22T09:39:18 Starting Internal StellarSolver Sextractor. . .
2020-10-22T09:39:18 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2020-10-22T09:39:18 There should be enough RAM to load the indexes in parallel.
2020-10-22T09:39:18 Evaluating Installed RAM for inParallel Option. Total Size of Index files: 19.7149 GB, Installed RAM: 31.2902 GB
2020-10-22T09:38:29 World Coordinate System (WCS) is enabled. CCD rotation must be set either manually in the CCD driver or by solving an image before proceeding to capture any further images, otherwise the WCS information may be invalid.
2020-10-22T09:38:29 Idle.
Please Log in or Create an account to join the conversation.
Disabling the inParallel option.
2020-10-23T23:33:37 Not enough RAM is available on this system for loading the index files you have in parallel
2020-10-23T23:33:37 Evaluating Installed RAM for inParallel Option. Total Size of Index files: 1.53425 GB, Installed RAM: 3.56387 GB, Free RAM: 1.51933 GB
free
total used free shared buff/cache available
Mem: 3736984 610880 1571604 70892 1554500 2912904
Swap: 3736976 0 3736976
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
make[2]: Leaving directory '/builddir/build/BUILD/stellarsolver-1.4.git'
In file included from /builddir/build/BUILD/stellarsolver-1.4.git/stellarsolver/sep/extract.h:26,
from /builddir/build/BUILD/stellarsolver-1.4.git/stellarsolver/sep/lutz.h:23,
from /builddir/build/BUILD/stellarsolver-1.4.git/stellarsolver/sep/lutz.cpp:25:
/builddir/build/BUILD/stellarsolver-1.4.git/stellarsolver/sep/lutz.cpp: In member function 'int SEP::Lutz::lutzalloc(int, int)':
/builddir/build/BUILD/stellarsolver-1.4.git/stellarsolver/sep/sepcore.h:69:23: error: 'malloc' was not declared in this scope
69 | {if (!(ptr = (typ *)malloc((size_t)(nel)*sizeof(typ)))) \
| ^~~~~~
/builddir/build/BUILD/stellarsolver-1.4.git/stellarsolver/sep/lutz.cpp:63:5: note: in expansion of macro 'QMALLOC'
63 | QMALLOC(info, infostruct, stacksize, status);
| ^~~~~~~
/builddir/build/BUILD/stellarsolver-1.4.git/stellarsolver/sep/lutz.cpp:32:1: note: 'malloc' is defined in header '<cstdlib>'; did you forget to '#include <cstdlib>'?
31 | #include <cstring>
+++ |+#include <cstdlib>
32 |
Please Log in or Create an account to join the conversation.
#include <cstdlib>
#include <cstdio>
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.