Here's the New Mexico Cosmos observatory, built in my back yard. It is located at 6800 feet in central New Mexico.the observatory houses an iOptron CEM120 EC2, C11 EdgeHD, WOStar 71, ASI1600MM Pro, Esatto Focuser, ZWO OAG with Lodestar X2, and ZWO EFW. The dome is a Nexdome on my own wooden ring, but with Nexdome rotator and shutter control. The building is in two levels, and the observatory is separated from the Control Room. The Control room is insulated, while the observatory is not. There is plenty of separation between the concrete pier and the building and the concrete pad. The concrete pier is 20" diameter and extends five feet below the ground (four feet above). The facility is controlled via INDI and KStars within the control room and remotely.
To show how stable the pier is, and total lack of any wind inside, check out the RMS rates in the EKOS guide screen below.
iOptron CEM120 EC2 and CEM25P
Celestron C11 EdgeHD
William Optics Star71
ASI 1600Mm Pro, ASI 462MC
Moonlight motorfocus & Esatto focuser
LodeStar X2 and ZWO OAG
RPI 4 B (4Gb) with SMate
Askar FRA400, TPO RC6, Nikon D5500 full spectrum (with IDAS D1 clip-in filter).
ZWO ASI120MM Mini on ZWO 30F4
ZWO ASI224MC-S on Orion 50 mm f/3.2
ZWO EAF x 2
Prepare for me to set up camp there. It's just an easy 9 hr drive for me. You may want to put some more beer in the fridge....
One question, though: I don't think you are guiding through your main telescope at almost 2000 mm FL, are you? So I think the calculated RMS value is overly generous. You should substitute that with your guide scope in the drop down menu. That will probably bring your RMS into a more normal range.
I would also guide at 1x1 bin, not 4x4 bin for maximal resolution.
Looking forward to talking more about this around the campfire.
See you soon,
Atlas Pro AZ-EQ, ASI1600MM-Pro, ASI120MM-S, ES102ED, WO-Z61, Nikon D3300, ASI-EFW, ZWO LRGB,Ha,O3,S2 filter set